Fender Telecaster ® electric guitar neck Hard maple / Hard maple fretboard, Paddle Head

SPECS 

- Scale length: 25.5" (648 mm)

- 22 fret slots  with fret installing options

About our fret installing service: We can install the frets for you,  just select the size of fretwire from the list and you will have them installed. Our method is compression and glue fretwire this will assure you a durable and stable fret job. We also serve it with the bevel back at aproximately 30º or flat if you preffer. Please add two working days to dispach necks with fretwire pre-installed due to procesing time. Please keep in mind that this is only installing service, crowned or fret leveling is nor included in this price

- Nut slot: 3.18mm wide and 2mm deep following the radius 

- Radius: 9.5" vintage

- Material: First quality American Hard Maple Quarter sawn (Acer Saccharum) neck and fretboard  

- Weight: 550 gms

- Width at the nut 42mm, with at the heel 56 mm

- Dual action low profile truss rod bar actioned by a 4 mm allen key (included) and accessed from the neck head

- Side dots material: 2mm ABS plastic   

- Inlay dots material: 6 mm ABS black plastic

- Standard thin "C shape" rear neck profile: 20,5 mm thickness at 1 st fret and 21,8 mm at 12 fret. These thickness can suffer a slightly variation because necks are finished sanding by hand

- Paddle peghead ready to cut your own design

- Tuner holes predilled: 8mm Ø diameter

- Neck heel fits any standard Fender Telecaster neck, 4 bolt-on system (see datailed pic)

- Of course is totally compatible with all our Telecaster bodies and also with originals

- Already sanded to 120 and 240, only needs final sanding and finish

- Wood grain may be different from the one shown in the pic

This neck can be made in other configuration of woods on demand. Please ask

These necks are made on demand so they will take about 2 labour days to be prepared

This product is completely manufactured in Spain respecting the standards of quality and sustainability