Click for more products.
No produts were found.

Strat style electric guitar neck roasted / torrefied Maple / Indian rosewood 12" Radius

Strat style electric guitar neck roasted / torrefied Maple / Indian rosewood 7,25" Radius

Read moreShow less
181.82 €
Fretwire options
100% secure payments
Add to compare0
Add to wishlist(1)


  • Scale length: 25.5" (648 mm)

  • 22 fret slots (with fret installing options)

  • About our fret installing service: We can install the frets for you,  just select the size of fretwire from the list and you will have them installed. Our method is compression and glue fretwire this will assure you a durable and stable fret job. We also serve it with the bevel back at approximately 30º or flat if you prefer. Please add two working days to dispatch necks with fretwire pre-installed due to processing time. Please keep in mind that this is only installing service, crowned or fret levelling is nor included in this price

  • Nut slot: 3.18 mm wide and 2 mm deep following the radius 

  • Radius: 12" modern style

  • Material: Torrefied / Roasted Hard Maple (Acer Saccharum) Indian Rosewood (Dalbergia Latifolia) fretboard

  • Weight: 550 grams

  • Width at the nut 43 mm, width at the heel 56 mm

  • Dual action low profile truss rod bar actioned by a 4 mm Allen key (included) and accessed from the neck head. This style of truss rod are adjusted the opposite than single action truss rods, if you turn the key clockwise you will increase concave (more relief) and counter clockwise you will increase convex (less relief)

  • Side dots material: 2mm ABS plastic   

  • Inlay dots material: 6 mm real white Mother of pearl

  • Standard thick "C shape" rear neck profile: 22,8 mm thickness at 1 st fret and 24,8 mm at 12 fret. These thickness can suffer a slightly variation because necks are finished sanding by hand

  • Tuner holes pre drilled: 8 mm Ø diameter (can also be made at 10 mm on demand)

  • Neck heel fits any standard Strat original body, 4 bolt-on system (see detailed pic) Of course is totally compatible with all our Strat style bodies

  • Already sanded to 120 and 240, only needs final sanding and finish

  • Wood grain may be different from the one shown in the pic

  • This neck can be made in other configuration of woods on demand. Please ask

  • These necks are made on demand so they will take about 2 labour days to be prepared

This product is completely MANUFACTURED IN SPAIN respecting the standards of quality and sustainability

Read moreShow less
Product Details



Create a free account to save loved items.

Sign in

Create a free account to use wishlists.

Sign in